C&F Design Standard Bobbin Holder/Long

Description:

A bobbin holder with a head that is about 10mm/0.4inch longer than the regular size.

By holding the hand slightly away from the hook with longer, the sight space of the material is improved.
This bobbin holder is ideal for winding streamers, etc., which are made by tieing fibrous materials multiple times.
If you need stronger tension, please install the Gravity System available separately (CFT-67/S/CFT-67/M).

Uses high-quality ceramic (zirconia) tube that prevent threads from breakage.
A dedicated bobbin threader is included.
By opening and closing the arm, adjust it so that the appropriate tension can be obtained.
When applying strong tension to the thread, be careful not to apply too much load to the ceramic tube and break it.